View source for Replacing the Schneider Contactor

=== Replacing the Contactor ===
<div style="float: right"><peertube>https://videos.mechtrace.com/w/ajpDWriU8SF3LVUDLSE2En</peertube></div>
To change the contactor, the following need to be done:

# Switch off the equipment and unplug the machine and ensure there is no power.
# Open the control panel on the side by removing the lock.
# Locate the contactor that has tripped.
# Untrip the contactor that has tripped by pushing on the green switch.
# If it continues tripping, the contactor needs to be changed.
# Remove the RYB Cables from the contactor both from the input and output size by using a tester and rotating the screw in the contactor where the wires are inserted into the contactor Please note the location of the cables.
# Using a tester remove the screws of the contactor and keep the contactor aside.
# Replace the conactor with the corresponding contactor in the same location.
# Once the contactor is removed, put the new one in place of that.
# Put back the input and output wires which were removed in point 6 using a tester. Please ensure the wires are matching the same colour coding.
# Close the electrical panel cover and lock the same.
# Plug the equipment back into the socket and switch it on.
Contactors can be bought by clicking [https://www.mechtrace.com/shop/category/electrical-and-electronics-contactors-48 here].