View source for Replacing the Schneider Start Stop Switch

To change the Start Stop switch, the following need to be done:
<div style="float: right"><peertube>https://videos.mechtrace.com/w/9HejYNddDRRX9rkcVx1jfN</peertube></div>
# Switch off the equipment and unplug the machine and ensure there is no power.
# Open the control panel on the side by removing the lock.
# Remove the connections for the start stop switch using a tester. Please note the connections.
# Unscrew the switch by loosening the 2 screws on the switch using a tester and remove the start stop switch from the panel by turning it anti-clockwise.
# Put the new emergency switch in place of this and rotate it clockwise to ensure it's tight.
# Connect the new connections in the same colour coding and place it as removed from.
# Close the electrical panel cover and lock the same.
# Plug the equipment back into the socket and switch it on.
The start stop switch can be bought by clicking [https://www.mechtrace.com/shop/ry163pol-rotary-switch-16a-3pole-on-off-rotary-switch-220?search=Rotary#attr=532 here].