View source for Schneider PLC Display Panel HMISUC Series

<div style="float: right">
<peertube>https://videos.mechtrace.com/w/pE8t9uFrwMS8tKrwAHgZBc</peertube></div>

# Switch off the equipment and unplug the machine and ensure there is no power.
# Open the control panel door.
# Open the control panel door which is the left door of the oven by unlocking the door and pulling it back
# Locate the star screws holding the display panel and open the cover by rotating the them anticlockwise.
# Keep the cover aside.
# Remove the 3 connectors, connected to the display panel by pulling it up gently.
# Above the display panel you will notice a button "Press to Open" . Press it down to pen the Panel. The panel will come out.
# Keep it aside gently.
# Unscrew the Display Panel by turning the screw by hand anti clockwise.
# Keep the screw safely.
# Pull the Display Panel out from the front of the oven.
# Put the new Display Panel in place of this.
# Put the screw back which was removed in Point 9 and turn it clockwise. Turn it gently by hand to tightness. '''Do not over tighten it.'''
# Put the Display Panel that was removed in Point 7 back. A click noise would be heard to ensure it's locked in place.
# Connect the connectors which were removed in Point 6 back to the original places.
# Put the over back that was removed in Point 3 and tighten the screws by rotating them clockwise.
# Close the door and lock the door by tightening the key.
# Switch the oven back on.
HMIs can be purchased by clicking [https://www.mechtrace.com/shop?search=HMI&order=name+asc here].