View source for Troubleshooting Guides for the CS aerotherm Bread Slicer CSTTS-500

[[File:Bread Slicer.png|alt=CS aerotherm Bread Slicer|thumb|150x150px|CS aerotherm Bread Slicer]]
This Table Top Bread slicer is '''perfect for Small and Medium Bakeries'''. This high performance Bread Slicer is perfect for slicing bread of different grams. It operates at a high speed and packs in fast moving blades that slice bread smoothly. Blades can be changed easily. It is the best selling table top bread slicer machine.

[https://www.csaerotherm.com/page/industrial-slicer?mtm_campaign=mechsolve Click here to know more]

=== Replacing the Slicer Blades and Blade Frame ===
<div style="float: right> <peertube>https://videos.mechtrace.com/w/rjfmK4WZzAdFuapPQZnbzr</peertube></div>
To change the blade frame of the Table Top Slicer CSTTS-500, and assemble it back again the following needs to be done:

# Switch off the Table Top Slicer CSTTS-500 and unplug the Slicer and ensure there is no power.
# Loosen and remove the bolts of the front cover using a 4 mm allen key.
# Once removed, use an 8 mm allen key to remove the frame.
# Using a 12-13 mm spanner, remove the M8 bolt on the top of the frame.
# Using an 8 mm allen key, remove the the M10 bolt at the bottom of the blade frame.
# Using the adjustable grip pliers provided with the machine, press the spring loader and remove the blade.
# Put back the blade in the same position, and press the spring lever using the same adjustable grip pliers.
# Once put back in place, ensure it's properly fitted and tight.
# Using an 8 mm allen key, put back the the M10 bolt at the bottom of the blade frame.
# Using a 12-13 mm spanner, put the M8 bolt on the top of the frame.
# Plug in the Table Top Slicer CSTTS-500 and switch it on.
# Adjust the frame, for uniform slicing by adjusting the 8mm and 10mm bolts at the top and bottom respectively.
# Put back the bolts of the front cover using a 4 mm allen key.
# The Table Top Slicer CSTTS-500 is ready to use.

=== Replacing the Teflon Strip ===
<div style="float: right> <peertube>https://videos.mechtrace.com/w/onxZ8aa8UHguur1pawEuvy</peertube></div>
To change the Teflon Strip of the Table Top Slicer CSTTS-500, the following needs to be done:

# Switch off the Table Top Slicer CSTTS-500 and unplug the Slicer and ensure there is no power.
# Using a 3 mm allen key, remove the top front cover of the Table Top Slicer CSTTS-500 .
# Using a 3 mm allen key, remove the top screws of the cover.
# Using a 3 mm allen key, remove the rear screws of the cover.
# Remove the cover by lifting it up and place it at a side.
# Using an 12-13 mm spanner, remove the four bolts holding the teflon strip in place. Keep the bolts and nuts safely.
# Remove the holder and place it to the side.
# Remove the old teflon piece.
# Put the new teflon piece in place of the old one. Ensure it's tightly put.
# Put back the holder in the same place as removed.
# Using an 12-13 mm spanner, put back the bolts and nut and ensure it is tightened properly.
# Put back the top cover.
# Using a 3 mm allen key, put back the the rear screws of the cover.
# Using a 3 mm allen key, put back the the top screws of the cover.
# Using a 3 mm allen key, put back the the front screws of the cover.
# Plug the machine back into the socket and switch it on.
# The Table Top Slicer CSTTS-500 is ready to use.

=== Replacing the Motor ===
<div style="float: right> <peertube>https://videos.mechtrace.com/w/xm8sRKLHkv93AGX8QyPaVc</peertube></div>
To remove the motor and assemble it back again of the Table Top Slicer CSTTS-500, the following needs to be done:

# Switch off the Table Top Slicer CSTTS-500 and unplug the Slicer and ensure there is no power.
# To remove the cover behind the slicer use a 6 mm allen key to loosen screws.
# Once removed, place it on the side.
# Loosen the motor bolts located below the motor using a 12-13 mm spanner.
# Remove the belt between the motor and the pulley.
# Remove all the bolts below the motor, and lift the motor.
# Put the new motor back in the same place.
# Tighten the bolts using the same 12-13 mm spanner to a certain extent and not fully tight.
# Put back the belt and ensure it's placed properly.
# Move the motor to the right place to ensure the belt is tight.
# Tighten the bolts below the motor completely.
# Put back the cover and tighten all the screws using the 6 mm allen key.
# Connect the power and switch on the slicer.
# To ensure perfect tightness of the belt, ensure there are no sounds from the motor and pulley.

=== MPCB Trip and Replacement ===
<div style="float: right> <peertube>https://videos.mechtrace.com/w/5U9wzBgbNVyUufeF8xqPz2</peertube></div>
To change the MPCB for the Table Top Slicer CSTTS-500, the following needs to be done:

# Switch off the Table Top Slicer CSTTS-500 and unplug the Slicer and ensure there is no power.
# Remove the back cover using 6 mm allen key.
# Locate the MPCB at the left side of the machine when looking at the machine from the back.
# If the MPCB is in the down (trip) position, push it upwards to un trip it.
# If the MPCB comes back to the down (trip) position, then the MPCB needs to be replaced.
# Ensure the Table Top Slicer CSTTS-500 is unplugged.
# Remove the connections to the MPCB from the top of the MPCB. Keep in mind the colour coding.
# The top of the MPCB has a colour coding (from left to right).
# Loosen the clip from the above, push the MPCB up to remove the MPCB.
# Please replace with the same make and model of the MPCB. The specifications of the MPCB are: Schneider Make GV2 MPCB Range of 1-1.6A.
# Once removed, put the new MPCB in place by clipping the top first, and moving it down. 
# Ensure it's locked in place.
# Once locked, connect the wires on top and at the bottom in the same place as it was before removing.
# Ensure the wires are connected tightly.
# Plug the machine back into the socket and switch it on.
# The Table Top Slicer CSTTS-500 is ready to use.

=== Spare Parts ===
[https://www.mechtrace.com/shop/category/customised-components-cs-aerotherm-bread-slicer-68?mtm_campaign=mechsolve To buy spare parts a discount, please click here]