Troubleshooting Guides for the CS aerotherm Bread Moulder - Revision history

Admin at 10:01, 8 November 2023

2023-11-08T10:01:44Z

@@ Line 5: / Line 5: @@
 [https://www.csaerotherm.com/page/moulder?mtm_campaign=mechsolve Click here to know more]
 === MPCB Trip and Replacement ===
@@ Line 54: / Line 99: @@
 # Connect the wires with the same colour code.
 # Close the Starter Box.

Admin: /* Replacing the Timer Belt */

2023-11-08T10:01:09Z

Replacing the Timer Belt

← Older revision		Revision as of 15:31, 8 November 2023
Line 90:		Line 90:

	=== Replacing the Timer Belt ===		=== Replacing the Timer Belt ===
			<div style="float: right"><peertube>https://videos.mechtrace.com/w/gLAoD7Gfz2b3Zv2t74Z5Ug</peertube></div>
	To replace the timer belt, following needs to be done.		To replace the timer belt, following needs to be done.

Admin: /* Replacing the Roller */

2023-11-08T10:00:38Z

Replacing the Roller

← Older revision		Revision as of 15:30, 8 November 2023
Line 69:		Line 69:

	=== Replacing the Roller ===		=== Replacing the Roller ===
			<div style="float: right">
			<peertube>https://videos.mechtrace.com/w/7Grc2Sc7dKdab3j4NYh1hc</peertube></div>
	To replace the roller, follow the below mentioned steps.		To replace the roller, follow the below mentioned steps.

Admin: /* Replacing Motor */

2023-11-08T09:59:53Z

Replacing Motor

← Older revision		Revision as of 15:29, 8 November 2023
Line 56:		Line 56:

	=== Replacing Motor ===		=== Replacing Motor ===
			<div style="float: right">
			<peertube>https://videos.mechtrace.com/w/8ELpmeHYZeNocbautEwEEW</peertube></div>
	To replace the motor, following needs to be done.		To replace the motor, following needs to be done.

Admin: /* Replacing Starter */

2023-11-08T09:59:24Z

Replacing Starter

← Older revision		Revision as of 15:29, 8 November 2023
Line 44:		Line 44:

	=== Replacing Starter ===		=== Replacing Starter ===
			<div style="float: right">
			<peertube>https://videos.mechtrace.com/w/cj2B4noyy4Z9U9osqAJAwj</peertube></div>
	To replace the starter, please follow the below mentioned steps.		To replace the starter, please follow the below mentioned steps.

Yogitajoshi: Replacing the Timer Belt

2023-11-08T09:38:48Z

Replacing the Timer Belt

← Older revision		Revision as of 15:08, 8 November 2023
Line 52:		Line 52:
	# Connect the wires with the same colour code.		# Connect the wires with the same colour code.
	# Close the Starter Box.		# Close the Starter Box.

			=== Replacing Motor ===
			To replace the motor, following needs to be done.

			# Switch off the machine and ensure there is no power.
			# Locate the motor under the long moulder.
			# Remove the Chain attached to the motor.
			# Remove the Motor mounting nuts using the appropriate tool.
			# Replace the old motor with the new one.
			# Put the mounting nuts back on the motor.
			# Connect the Chain back to the motor.

			=== Replacing the Roller ===
			To replace the roller, follow the below mentioned steps.

			# Switch off the machine and ensure there is no power.
			# Remove the side cover.
			# Pull up the Spring loaded tensioner pulley.
			# Remove the Timer Belt.
			# Dismantle the Timer Pulley.
			# Dismantle the roller mounting flanges with bearings.
			# From the other side, turn the knobs and remove the cover.
			# Dismantle the gear, mounting flange with bearing.
			# Now, you can remove the rollers.
			# Put the new rollers in the given slots.
			# Assemble the gear, mounting flange with bearing.
			# Put the cover back and tighten the knobs.
			# On the other side, assemble the roller mounting flanges with bearings.
			# Assemble the Timer Pulley and Timer Belt by pulling up the spring loaded tensioner pulley.
			# Put the side cover back

			=== Replacing the Timer Belt ===
			To replace the timer belt, following needs to be done.

			# Switch off the machine and ensure there is no power.
			# Remove the side cover.
			# Pull up the Spring loaded tensioner pulley.
			# Remove the Timer Belt.
			# Put a new Timer Belt by pulling up the Spring loaded tensioner pulley.
			# Put the side cover back.

Yogitajoshi: Replacing Starter

2023-11-08T08:58:09Z

Replacing Starter

← Older revision		Revision as of 14:28, 8 November 2023
Line 31:		Line 31:
	<div style="float: right>		<div style="float: right>
	<peertube>https://videos.mechtrace.com/w/gV8755Je6y6ZWhwj4Qwh7Q</peertube></div>		<peertube>https://videos.mechtrace.com/w/gV8755Je6y6ZWhwj4Qwh7Q</peertube></div>
	To change the switch, the following ~~need~~ to be done:		To change the switch, the following needs to be done:

	# Switch off the CS aerotherm Bread Moulder and unplug the machine and ensure there is no power.		# Switch off the CS aerotherm Bread Moulder and unplug the machine and ensure there is no power.
Line 42:		Line 42:
	# Close the electrical panel cover and lock the same.		# Close the electrical panel cover and lock the same.
	# Plug the CS aerotherm Bread Moulder back into the socket and switch it on.		# Plug the CS aerotherm Bread Moulder back into the socket and switch it on.

			=== Replacing Starter ===
			To replace the starter, please follow the below mentioned steps.

			# Switch off the machine.
			# Open the Starter Box located underneath the moulder.
			# Note down the colour coding of the wires and then disconnect the wires.
			# Remove the old starter and put a new one in its place.
			# Connect the wires with the same colour code.
			# Close the Starter Box.

Admin at 17:57, 7 November 2023

2023-11-07T17:57:09Z

← Older revision		Revision as of 23:27, 7 November 2023
Line 29:		Line 29:

	=== Replacing The Emergency Switch ===		=== Replacing The Emergency Switch ===
	<div style="float: right><peertube>https://videos.mechtrace.com/w/gV8755Je6y6ZWhwj4Qwh7Q</peertube></div>		<div style="float: right>
			<peertube>https://videos.mechtrace.com/w/gV8755Je6y6ZWhwj4Qwh7Q</peertube></div>
	To change the switch, the following need to be done:		To change the switch, the following need to be done:

Admin at 07:11, 7 November 2023

2023-11-07T07:11:31Z

← Older revision		Revision as of 12:41, 7 November 2023
Line 41:		Line 41:
	# Close the electrical panel cover and lock the same.		# Close the electrical panel cover and lock the same.
	# Plug the CS aerotherm Bread Moulder back into the socket and switch it on.		# Plug the CS aerotherm Bread Moulder back into the socket and switch it on.
	~~[[File:Guide.stl\|thumb]]~~

Admin at 07:09, 7 November 2023

2023-11-07T07:09:08Z

← Older revision		Revision as of 12:39, 7 November 2023
Line 41:		Line 41:
	# Close the electrical panel cover and lock the same.		# Close the electrical panel cover and lock the same.
	# Plug the CS aerotherm Bread Moulder back into the socket and switch it on.		# Plug the CS aerotherm Bread Moulder back into the socket and switch it on.
			[[File:Guide.stl\|thumb]]