Replacing an Emergency Switch

Replacing The Emergency Switch

To change the switch, the following need to be done:

1. Switch off the Control Panel and unplug the machine and ensure there is no power.
2. Open the control panel door.
3. Remove the connections for the Emergency switch using a tester. Please note the connections.
4. Unscrew the switch by loosening the 2 screws on the switch using a tester and remove the emergency switch from the panel by turning it anti-clockwise.
5. Put the new emergency switch in place of this and rotate it clockwise to ensure it's tight.
6. Connect the new connections in the same colour coding and place it as removed from.
7. Close the electrical panel cover and lock the same.
8. Plug the equipment back into the socket and switch it on.

The Emergency Switch can be bought online at a discount by clicking here.