Replacing the Schneider Start Stop Switch

To change the Start Stop switch, the following need to be done:

1. Switch off the equipment and unplug the machine and ensure there is no power.
2. Open the control panel on the side by removing the lock.
3. Remove the connections for the start stop switch using a tester. Please note the connections.
4. Unscrew the switch by loosening the 2 screws on the switch using a tester and remove the start stop switch from the panel by turning it anti-clockwise.
5. Put the new emergency switch in place of this and rotate it clockwise to ensure it's tight.
6. Connect the new connections in the same colour coding and place it as removed from.
7. Close the electrical panel cover and lock the same.
8. Plug the equipment back into the socket and switch it on.

The start stop switch can be bought by clicking here.